Internal Plume Lighting
Add-on Kit
If your Triple Stone Fountain Kit
is pre-drilled for the optional
IllumiGlow
®
Fountain Plume
Lighting Kit, follow the instructions
provided in the lighting kit before
returning to Step 7.
Kit Item: #PB2903
Proceed to Step 7 if Plume Lighting was Not Ordered
•
Connect the Tubing (3) to the Barbed Connector (2) at the
bottom of the RBG LED Light. (1)
•
Run the Tubing and Light Cord together down from the top of
the fountain. The Light Cord (4) is outside the Tubing and plug
end of the attached 4-pin cord will need to lead through the
narrow drilled hole. Take care not to get the 4-pin plug wet.
• At the fountain base, pull the Light Cords (4) above the grate,
and direct them to the Splitter (5). They may be
covered with Polished Pebbles.
The Tubing (3) continues
into the basin to the
connect to the
fountain pump.
AquaBox
®
Basin
1
3
4
Fountain
Pump
2
3
3
3
2
1
4
4
4
Basic RGB LED Plume Lighting Set Up –
See lighting kit for full instructions