Page | 2
V14612INSLM
IMPORTANT SAFETY INFORMATION
When installing and using this equipment, basic safety precautions should always be
followed.
**READ AND FOLLOW ALL INSTRUCTIONS**
WARNING:
To reduce risk of injury, do not permit children to use this product unless they
are closely supervised at all times.
Swimming Pool equipment can generate high pressures capable of causing injury.
Always use caution when manipulating valves associated with the pool equipment and
turn off the pump if pressures exceed manufacturer’s specification. Always turn off the
pool equipment when disassembling or servicing your circulation system.
Swimming Pool equipment can create suction sufficient to entrap even adults. If pool
fittings are broken or missing, turn off your equipment and contact a certified swimming
pool expert to make the needed repairs.
To ensure proper cleaning and to qualify the warranty, fax or email a System Design Form
provided by Blue Square along with a scaled pool plan for a FREE certified In-Floor
Design. (New pool construction only.)
Email: [email protected]
Fax: (888) 282-6955
If the pool plan design or dimensions change during excavation, a revised plan must be
submitted to Blue Square in order to maintain warranties.
Install the valve above ground at finished pool water level.
Do not bury top of clear lid
and inlet of valve after installation.
Install cleaning heads and nozzles according to the Design Plan.
If pool includes an elevated spa, install a check valve on the line feeding the spa heads
to avoid spa draining. Install other check valves (as normal) to avoid spa return jets and
suction lines from draining. For multiple elevation changes in bodies of water and/or
negative edge water features, please contact our design center. (800) 277-4150.
SAVE THESE INSTRUCTIONS
For customer service or support:
For on-line support: www.bluesquaremfg.com
To contact Blue Square:
Customer Service
525 E Baseline Road
Suite 107
Gilbert, AZ 85233
(800) 277-4150