8 | www.blueskyoutdoorliving.com
ASSEMBLY
TOOLS REQUIRED: PHILLIPS SCREWDRIVER, PLIERS
NOTE: TO ENSURE AN EASIER ASSEMBLY, WE STRONGLY ADVISE
ONLY FINGER TIGHTENING BOLTS DURING INITIAL ASSEMBLY. ONCE
ALL BOLTS ARE INSERTED, FULLY TIGHTEN ALL BOLTS. DO NOT
OVERTIGHTEN.
NOTE: BOLTS SHOULD BE INSERTED FROM THE OUTSIDE OF THE
FIRE PIT AND SECURED WITH NUTS ON THE INSIDE.
STEP 1
Attach the left side panel [E] to the
base [I] using four M6 x 10 mm screws
[L] and M6 nuts [N]. Repeat
to attach the right side panel [F] to
the base.
STEP 2
Insert the back panel [C] and place
against the inside of the back flanges
on the left and right side panels.
Attach using two M6 x 10 mm
screws [L] and M6 nuts [N]
on either side.
I
E
F
L
C
L
N
N
