manualshive.com logo in svg

Blue Sky Network ASE 9575P-HQ-DOD, Manual

Share
Download
Blue Sky Network ASE 9575P-HQ-DOD Manual Download Page 5

www.ase-corp.com

A Blue Sky Network Company

SAFETY INFORMATION 

(CONTINUED)

13.   For Vehicles Equipped With Airbags

 

An air bag inflates with great force. Do NOT place objects, including both installed or portable wireless equipment, in the  

 

area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air  

 

bag inflates, serious injury could result.

14.   Important Notes for PABX System Users

 

If using the docking station with a PABX system, take the following precautions to prevent damage to your unit.

 

The docking station emulates a standard land-line wall jack and generates the required operating and ringing voltages.  

 

Connect to a PABX as either a central office (CO) or trunk line. Never connect the docking station to a PABX as an extension  

 

or damage to the PABX or docking station may result.

5

ASE 9575P-HQ-DOD DOCKING STATION

www.blueskynetwork.com

V2.2 [2020-01-23]

Summary of Contents for ASE 9575P-HQ-DOD


















Reviews:

No comments

Brands by name

Popular brands

Load more brands