Blue Sky International MK II Owner'S Manual Download Page 3

READ INSTRUCTIONS

 - Read all safety and operating instructions 

before operating this product.

2. 

RETAIN  INSTRUCTIONS

  -  Retain  these  safety  and  operating 

instructions for future reference.

3. 

HEED WARNINGS

 - Follow all warnings on this product and in the 

operating instructions.

4. 

FOLLOW  INSTRUCTIONS

  -  Follow  all  operating  and  use 

instructions.

5. 

ATTACHMENTS

 - Do not use attachments not recommended by the 

product manufacturer as they may cause hazards.

6. 

WATER AND MOISTURE

 - Do not use this product near water - for 

example, near a bathtub, washbowl, kitchen sink, or laundry tub; in 
a wet basement; or near a swimming pool; and the like.

7. 

ACCESSORIES

  -  Do  not  place  this  product  on  an  unstable  cart, 

stand, tripod, bracket, or table. The product may fall, causing serious 
injury to a child or adult, and serious damage to the product. Use 
only with accessories recommended by the manufacturer, or sold 
with the product. Any mounting of the product should follow the 
manufacturer’s instructions and should use a mounting accessory 
recommended by the manufacturer.

8. 

POWER  SOURCE

  -  This  product  should  be  operated  only  from 

the type of power source indicated on the marking label on the 
back of the product. If you are unsure of the type of power that is 
supplied to your home, consult your product dealer or local power 
company.

9. 

OVERLOADING

 - Do not overload wall outlets or extension cords 

as this can result in a risk of fire or electric shock.

10. 

LIQUID ENTRY

 - Never spill any liquid of any kind on the product.

11. 

SERVICING

  -  Do  not  attempt  to  service  this  product  yourself. 

Opening or removing covers, including any over bottom or side 
speaker  drivers,  may  expose  you  to  dangerous  voltage  or  other 
hazards. Refer all service to qualified service personnel.

12. 

DAMAGE  REQUIRING  SERVICE

  -  Unplug  this  product  from  the 

wall  outlet  and  refer  servicing  to  qualified  personnel  under  the 
following conditions:

a. 

When the power-supply cord or plug is damaged.

b. 

If liquid has been spilled, or objects have fallen into this 
product.

c. 

If the product does not operate normally by following the 
operating instructions. Adjust only controls that are covered 
by the operating instructions as an improper adjustment of 
other controls may result in damage and will often require 
extensive work by a qualified technician to restore the 
product to its normal operation.

d. 

If the product has been dropped or damaged in any way.

e. 

When the product exhibits a distinct change in performance 
- this indicates a need for service.

13. 

REPLACEMENT PARTS

 - When replacement parts are required be 

sure the service technician has used replacement parts specified 
by the manufacturer or have the same characteristics as the original 
part.  Unauthorized  substitutions  may  result  in  risk  of  fire,  electric 
shock, or other hazard.

14. 

SAFETY CHECK

 - Upon completion of any service or repairs to this 

product,  ask  the  service  technician  to  perform  safety  checks  to 
determine that the product is in proper operating condition.

15. 

HEAT

 - This product should be situated away from heat sources 

such  as  radiators,  heat  registers,  stoves,  or  other  products  that 
produce heat.

Safety Instructions

Page 3

Summary of Contents for MK II





















Reviews: