background image

Stereo Monitoring System

USER MANUAL • 13 & 14 • Factory Service Instructions • General Contact Details

Page 14 • User Manual • Factory Service Instructions • General Contact Details

13.  Factory Service 

Instructions

Service for the U.S. versions of Blue Sky products is available only from our 
authorized distributor, Group One Ltd., located in Farmingdale, New York. 
(Service for Blue Sky products outside the United States can be obtained 
through local dealers or distributors.)  If your monitor needs service, follow 
these instructions:

1. 

Review the manual and ensure that you have followed all setup 
and operating instructions.

2. 

Call  (516)  249-1399  9:00am  to  5:30pm  EST  and  ask  for 
Customer Service. Explain the problem and request an RA (Return 
Authorization) number.  It is important to have your product serial 
number available when you call.  You must have an RA number 
before you can obtain service.  

3. 

Pack the product in its original packing material and box.  Please 
do not return the manual or power cord, if detachable (international 
/ non North American version only).  If you don’t have the original 
packing material and/or box, please let Customer Service know 
when you call for the RA number.  Blue Sky is not responsible for 
any damage that occurs due to non-factory packaging.

4. 

Include a legible note stating your name, shipping address (no 
P.O. boxes), daytime phone number, RA number, and a detailed 
description of the problem, including how it can be duplicated

5. 

Write the RA number on the top of the carton.

6

Ship the product to the address below.  We recommend United 
Parcel  Service  (UPS).  Please  insure  the  product  regardless  of 
shipping method.

 

 

Blue Sky International

 

 

ATTN: SERVICE DEPT / RA#

 

 

70 Sea Lane

 

 

Farmingdale, NY 11735

 

 

USA

7

Turnaround time is three to five business days depending on the 
problem.   When calling for RA numbers, please ask Customer 
Service what the turnaround time is.  The serviced product will be 
sent back to you via the same shipping method as received (i.e. if 
you ship your monitor UPS Ground it will be returned UPS Ground, 
UPS Red will be returned UPS Red etc...).  This only applies to 
products serviced under the warranty.

14.  General Contact Details

For sales and other enquiries, please contact Blue Sky at:

 

 

Blue Sky International

 

 

70 Sea Lane

 

 

Farmingdale, NY 11735

 

 

USA

 

tel: 

516 249 1399

 

fax: 

516 249 8870

 

email: 

[email protected]

To discover the very latest information check out our website at:

www.abluesky.com

2

Summary of Contents for EXO2

















Reviews: