3.
Select Remote Control and then select Remote Control Pairing
4.
Press and hold the Setup button until the LED Indicator turns green on the remote control
5.
Press the Menu button. Please allow a few seconds for the menu to display.
6.
Proceed by entering the pairing code displayed in blue on the pairing code pop-up screen. This code is
randomly generated.
Note:
If you don’t see a pairing code screen, repeat steps 1 and 2.
How to Un-Pair a Remote Control from a DTA:
(Used to take a remote control out of RF mode)
1.
Press and hold the Setup button for three seconds until the LED Indicator turns green on the remote
control
2.
Enter 9-8-7 on the remote control
3.
The LED Indicator will blink green twice on the remote control
How to Reset TV Programming:
(Resets only TV programming)
1.
Press and hold the Setup button for three seconds until the LED Indicator turns green on the remote
control
2.
Enter 9-8-6 on the remote control
3.
The LED Indicator will blink green twice on the remote control
How to Factory Reset the Remote Control:
(Only to be used if remote control is not functioning properly. Will reset TV programming and RF pairing)
1.
Press and hold the Setup button for three seconds until the LED Indicator turns green on the remote
control
2.
Enter 9-8-1 on the remote control
3.
The LED Indicator will blink green twice on the remote control
4.
Then proceed with TV Programming and Pairing to the DTA
Volume Control Commands through DTA Mini Box:
(Used to allow volume control through DTA if no TV programming code is available)
1.
Press and hold Setup button until the LED indicator turns green on the remote control
2.
Press the volume down button
