background image

Outdoor Gas Grill Model No. NSG3902B

Contact 1-800-762-1142 for assistance. Do not return to place of purchase.

page no.

Cleaning and Care

Notices

1. Abrasive cleaners will damage this product. 

2. Never use oven cleaner to clean any part of grill.

3.  Do not clean any grill part in a self cleaning oven. The extreme heat will damage 

the finish.

Cleaning Surfaces

1. Wipe surfaces clean with mild dishwashing detergent or baking soda. 

2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush.

3. Rinse clean with water. 

Cleaning Main Burner

1. Turn gas off at the control knobs and LP gas tank.

2. Remove cooking grates and heat plates.

3.  Remove burner by removing the three fasteners securing the burner to the grill bottom.

4. Lift burner up and away from gas valve orifice.

5. Disconnect wire from spark electrode.

6.  Clean inlet (venturi) of burner with small bottle brush or compressed air.

7. Remove all food residue and dirt on burner surface.

8.  Clean any clogged ports with a stiff wire (such as an opened paper clip)

9.  Inspect burner for any damage (cracks or holes). If damage is found, replace with new 

burner.

10.  Reinstall burner, check to insure that gas valve orifices are correctly positioned inside 

burner inlet (venturi). Also check position of spark electrode. 

Cleaning Side Burner

1. Turn gas off at the control knobs and LP gas tank.

2. Remove side burner grid.

3.  Remove burner by removing the two screws securing the burner to the side shelf.

4. Lift burner up and away from gas valve orifice.

5.  Clean inlet (venturi) of burner with small bottle brush or compressed air.

6. Remove all food residue and dirt on burner surface.

7.  Clean any clogged ports with a stiff wire (such as an opened paper clip)

8.  Inspect burner for any damage (cracks or holes). If damage is found, replace with new 

burner.

9.  Reinstall burner, check to insure that gas valve orifice is correctly positioned inside burner 

inlet (venturi). Also check position of spark electrode. 

Product Registration

Please register your product immediately at www.BlueRhino.com or call 1.800.762.1142.

Limited Warranty

Blue Rhino Global Sourcing, LLC (“Vendor”) warrants to the original retail purchaser 
of this grill, and to no other person, that if this grill is assembled and operated in 
accordance with the printed instructions accompanying it, then for a period of one 
(1) year from the date of purchase, all parts in such grill shall be free from defects 
in material and workmanship. Vendor may require reasonable proof of your date of 
purchase from an authorized retailer or distributor. Therefore, you should retain your 
sales slip or invoice. This Limited Warranty shall be limited to the repair or replacement 
of parts, which prove defective under normal use and service and which Vendor shall 
determine in its reasonable discretion upon examination to be defective. Before returning 
any parts, you should contact Vendor’s Customer Service Department using the contact 
information listed below. If Vendor confirms, after examination, a defect covered by this 
Limited Warranty in any returned part, and if Vendor approves the claim, Vendor will 
replace such defective part without charge. If you return defective parts, transportation 
charges must be prepaid by you. Vendor will return replacement parts to the original 
retail purchaser, freight or postage prepaid.

This Limited Warranty does not cover any failures or operating difficulties due to 
accident, abuse, misuse, alteration, misapplication, improper installation or improper 
maintenance or service by you or any third party, or failure to perform normal and routine 
maintenance on the grill, as set out in this owner’s manual.  In addition, the Limited 
Warranty does not cover damage to the finish, such as scratches, dents, discoloration, 
rust or other weather damage, after purchase.

This Limited Warranty is in lieu of all other express warranties. Vendor disclaims all 
warranties for products that are purchased from sellers other than authorized retailers 
or distributors. AFTER THE PERIOD OF THE ONE (1)-YEAR EXPRESS WARRANTY, VENDOR 
DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE. FURTHER, VENDOR SHALL HAVE NO LIABILITY WHATSOEVER TO PURCHASER 
OR ANY THIRD PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES. Vendor assumes no responsibility for any defects caused by 
third parties. This Limited Warranty gives the purchaser specific legal rights; a purchaser 
may have other rights depending upon where he or she lives. Some jurisdictions do 
not allow the exclusion or limitation of special, incidental or consequential damages, or 
limitations on how long a warranty lasts, so the above exclusion and limitations may not 
apply to you.

Vendor does not authorize any person or company to assume for it any other obligation 
or liability in connection with the sale, installation, use, removal, return, or replacement of 
its equipment, and no such representations are binding on Vendor.

Blue Rhino Global Sourcing, LLC
104 Cambridge Plaza Drive
Winston-Salem, North Carolina 27104 USA
(800) 762-1142
24 Hour Fax: (336) 659-6743
[email protected]

Caution

1.  All cleaning and maintenance should be done when grill is cool 

and with the fuel supply disconnected.

2.  DO NOT clean any grill part in a self cleaning oven. The extreme heat 

will damage the finish.

Summary of Contents for UniFlame NSG3902B



















Reviews: