Page 7 of 9
405-0066 Rev. B
9/8/09
14
14
14. On the driver’s side, trim the corner of the air baffl e
up to the rubber as shown.
Ô
Ô
Ô
Ô
2010 Ford Fusion (No Hybrid)
Installation Instructions
BX2610
13. Insert 3/8-16 x 2” hex bolts in all holes, 1” spacers
are placed between the baseplate and the frame
for each hole. The front hole and the bottom back
hole have 3/8” lock washers with 3/8-16 hex nuts
(white arrows). The top back hole has the 3/8” lock
washer on this side and a 3/8-16 nut plate inserted
into the drilled hole (gray arrow). Be sure to use
Loctite on all the bolts. Do this to both sides of the
vehicle.
13
13
Ô Ô
Ô Ô
16
16
16. Reattach the air baffl e.
15. Using the utility knife, cut the tab off of the washer
reservoir.
Ô
Ô
15
15
BE SURE TO USE LOCTITE
®
RED ON ALL BOLTS
BEFORE TIGHTENING. TIGHTEN ALL BOLTS
ACCORDING TO THE TORQUE CHART ON THE
FRONT PAGE OF THESE INSTRUCTIONS OR ON
PAGE 3 OF THE BASEPLATE TOWING GENERAL
INSTRUCTIONS.
