Page 8 of 9
292-2865 Rev. H
12/7/10
19
19
20. Align the fascia to its original position and,
using a hack saw blade, trim necessary
openings in the grille for the attachment tabs.
Do this to both sides of the vehicle.
20
20
19. On the passenger’s side, reinstall washer
reservoir using existing bolts. Reconnect
electrical grounds to the lower front bolt hole
using the #10-16 x 1 self drilling screw (see
white arrow).
Ô
Ô
Be sure that
ALL
electrical connections
are plugged in properly and functioning
BEFORE
installing the fascia.
DEALER or INSTALLER:
Be certain the user receives the
instruction sheets for their products.
22.
Reinstall the fascia, radiator cover, pushpins
and bolts.
Install the tow bar and safety cables
according to the instructions provided in their
packages. When demonstrating this to the
customer, be sure to include all the contents
and packages.
Do
NOT
substitute other devices if the tow
bar pins and clips are misplaced.
21
21
21. Attach the permanent baseplate safety
cables to the provided convenience link on
the baseplate (see grey arrow). The photo
above shows the recommended installation
of the cables to frame of vehicle (see white
arrow). Additional options may interfere with
suggested mounting; in this case secure
the cables to a solid piece of the frame as
described in the instructions included with the
permanent baseplate safety cables. Be sure
the safety cables do not rub against any hoses
or moving parts. Do this to both sides of the
vehicle.
Ô
Ô
Ô
Ô
Ô Ô
2006-11 Hyundai Accent
(No Foglights) Installation Instructions
BX2323