1. Remove seven Phillips pushpins from the top
of radiator cover (see white arrows). Using the
10mm socket, remove two metric bolts (see
grey arrows) from radiator cover and lift to
remove. Set bolts, pushpins and radiator cover
aside to be reinstalled later.
Attachment Tabs:
Due to the design of the removable tabs, the
RangeFinderII tow bar can not be used. Adapters,
except the BX8833 and BX88151, can not be used
with this baseplate.
Installation Notes:
The radiator cover, fascia, air baffl e, air bag
sensor, washer reservoir, metal bumper and
air bag sensor are removed. The grille is
trimmed. Drilling is required. The air bag
sensor bolt is not reinstalled.
The dimensional variations between otherwise
identical vehicles can be considerable.
While the baseplate was designed for easy
installation, it may be necessary to tailor the
baseplate slightly to compensate for auto
manufacturer’s tolerances. These minor
adjustments may include fi ling a hole slightly,
bending electrical rods or bending end plates.
The BX8869 Bulb and Socket Wiring Kit is
recommended for this vehicle.
Installation Instructions:
Page 3 of 9
292-2865 Rev. H
12/7/10
1
1
2
2
2. Using the 8mm socket, remove one metric
bolt from edge of fascia, just inside wheel well.
Do this to both sides of the vehicle. Set bolts
aside to be reinstalled later.
Ô
Ô
Ô Ô
Ô Ô
Ô Ô
Ô Ô
Ô Ô
Ô Ô
Ô
Ô
Ô
Ô
Ô
Ô
Possible Location for the BX8869
Possible Location for the BX8869
Bulb and Socket Wiring Kit.
Bulb and Socket Wiring Kit.
ÔÔ
Handling of some cosmetic parts
when installing this product may
require the use of protective covers,
rags, specialty tools, etc. to prevent
damage.
2006-11 Hyundai Accent
(No Foglights) Installation Instructions
BX2323