Blue Max CS-65, Operation Manual

Page: 4 / 11

2. Attaching front foot to the basic machine. See picture 2.
1
2
3
4
5
2.1. Remove the nuts from bolts 1, 2, remove the bolts and pipe spacer.
2.2. Forward the parts box to make the long pin 3 clear.
2.3. Pull the discharge hopper out of the parts box and align the holes 1,2.
2.4. Hitch front foot 5 to the side board of the parts box and align the mounting holes with
holes 1,2.
2.5. Put the pipe spacer that was removed in step 1 back in place. Insert the bolts and secure
them tightly with gaskets and nuts.
3. Attach axle brackets, axle and tires. See picture 3.
6
7
3.1 Remove the wood shelf.
3.2 Disassemble the bolt 7 and pipe spacer.
3.3 Put the rear axle brackets in place and align the mounting hole with holes 6.7.
3.4 Insert M8*20 bolt in hole 6 from outside to inside and secure it slightly with gasket and