background image

We provide safe, well-designed and high performance standard BLUE JOY battery pack for you. 
The battery Pack is compact, easy to install free of maintenance and used as the building block 
of energy storage system by assembling in parallel. Battery packs are suitable for commercial 
use, industrial and domestic power supply, agricultural power needs, and more.
This manual contains all the information necessary to install,use and maintain the BLUE JOY 
battery. We kindly ask you to read this manual carefully before using the product.
This manual is meant for the installer and the user of the BLUE JOY battery. Only trained and 
qualified  staff  may  install  and  perform  maintenance  on  the  BLUE  JOY  battery.The  BLUE  JOY 
battery may not be used for any purposes other than described in this manual. Using the BLUE 
JOY battery for any other purpose will be considered improper use and will void the warranty of 
the product. We cannot be held responsible for any damage caused by improper, incorrect or 
unwise  use  of  the  product.Read  and  understand  this  manual  completely  before using the 
product.  During  the  use  of  the  product,  user  safety  should  always  be  ensured,  so  installers, 
users, service personnel and third parties can safely use the BLUE JOY battery.

48V 200AH LITHIUM ION BATTERY BANK

1. Technical Parameters

Model: BJ48-200(U)
Rated voltage: 51.2V 
Standard capacity: 200Ah 
Continuously use input current: 100A 
Continuously use output current: 100A 
Charging voltage: 57.6V-60V 
Cut-off: 2.5V single cell 
Self-Discharge(  25℃): <3%/month 
Depth of discharge: Up to 95% 
Charge method ( CC/CV ): Operation: -20℃—70℃; Recommendation: 10℃—45℃ 
Cycle life: 6000times
Warranty: 5years 
Size : 1215*475*167mm
Weight:136KG

1

Summary of Contents for BJ48-200













Reviews: