15
Lowes.com
OPERATInG InsTRUCTIOns
4. depth-of-Cut Adjustment
wARnInG:
ALWAYS maintain the correct blade-
depth setting. The correct blade-depth setting for all cuts
should not exceed the thickness of the material being cut
by more than 1/4 in. (6.5 mm). Greater blade depth will
increase the chance of kickback and cause the cut to be
rough.
a. Unplug the saw.
b. Pull the depth-locking lever (G) upward to
release it.
c. Determine the desired depth of cut.
d. Hold the base plate (K) flat against the workpiece
and raise or lower the saw until the indicator mark
on the saw aligns with the desired depth on the
scale.
e. Push down on the depth-locking lever (G) to lock
it into position.
G
K
4
5. Adjusting the Cutting Angle
a. Loosen the angle-locking knob (H), located on the
0°~45° bevel gauge (I) on the base plate (K).
b. Tilt the body of the saw until the required angle is
reached. Refer to the scale on the 0°~45° bevel
gauge (I).
c. Tighten the angle-locking knob (H) to secure the
saw and angle.
H
G
K
I
5
