Blue Giant EPJ-40, Owner'S Manual

Page: 52 / 124

8-2 B
G-D40-0131
8-2.2. Repair
1. Remove pins (11, Figure 8-2 ), shafts (12) and
load wheel (13) from wheel brackets (8).
2. Remove pins (11) and shafts (10). Free brackets
(8) from tension bars (6).
3. Remove bushings (9) from brackets (8) if replace-
ment is necessary,
4. Remove pins (11) and shafts (3) from connector
(5) and free tension bars from connector (5).
5. Loosen nuts (4) and remove clevises (5) from ten-
sion bars (15).
6. Remove bushings (2) from link (1) if replacement
is necessary.
7. Install reassemble by reversing the steps above.
8-2.3. Installation
1. Position link assembly under frame (4).
2. Position wheel brackets (8, Figure 8-2 ) in frame
(4, Figure 8-1 ) and install shafts (6). Secure shafts
(6) with pins (7).
3. Position link assembly (1, Figure 8-2 ) and install
shafts (15). Secure shafts (15) with screws (24),
4. Remove blocking and lower the truck to the
ground.
5. Turn on key switch (21, Figure 12-20 ) and emer-
gency disconnect (2, Figure 12-19 ).
Figure 8-2 Lift Linkage Assembly
D40-12