Blue Giant BG ZERO, Owner'S Manual

Page: 5 / 100

SECTION 1
DESCRIPTION
1-1. INTRODUCTION.
This publication describes the 24 volt BG Zero
Electric Access Vehicle by Blue Giant. Included are
planned maintenance instructions, lubrication
procedures, corrective maintenance procedures and
a complete parts list with part location illustrations.
Users shall comply with all requirements indicated in
applicable OSHA standards and the current edition of
A.N.S.I. A92.6. By following these requirements and
the recommendations contained in this manual, you
will receive many years of dependable service from
your BG Zero Electric Access Vehicle.
1-2. GENERAL DESCRIPTION.
The self-propelled BG Zero Electric Access Vehicle
Electric Access Vehicle lifts and transports up to 750
pounds capacity including load and operator. The
vehicle enables general maintenance work and
efficient selection and moving of materials in any area
or at any level of the warehouse or storeroom. This
vehicle is not for use on mezzanines or balcony
areas. The design per-mits one man to perform all
operations of selecting stock, driving vehicle, and
replacing the stock at the designated place. The
battery-powered vehicle is quiet and allows operation
in closed areas without special provisions for
ventilation.
Figure 1-1
BG Zero
Elevating Work Platform
R8521
ITEM COMPONENT
1 Control panels
2 Storage tray
3 Lift mast
4 Lower storage tray
5 Drive wheel
6 Controller
7 Caster
8 Emergency stop switch
9 Charger socket
10 Battery
11 Frame
12 Load wheels
13 Operator platform
14 Hydraulic pump assembly
15 Warning light
16 Access gates
17 Emergency operation area
18 Blue Lamp
19 “Deadman” foot switch
ITEM COMPONENT
5