Jinan Blue Elephant CNC Machinery Co.,Ltd
：
Mobile
：
0086-15064026772
Web
：
24
Test go home function. Each axis has its limited switch. when machine move to each axis switch, that
place is the mechanical original point. For mach3, please press this button
(if it not go home, please
contact us.)
After Ref all home, X Y Z will become zero, if not , please press the right button to make them to be
zero. Then we will test soft limits, before that, we need to check if our each travel setting is right.
Like the picture showing, if your machine (1020 model)
X can go +1000mm travel. So we should set soft Max 1000mm,
Y can go +1000mm travel. So we should set soft Max 2000mm,
Z can go -100mm travel. So we should set soft Min -100mm,
Then we need to press this soft limits button first before (
avoid each axis movement to be over
the travel zone)
when test this function. Then try to move x to right, it will stop when x axis number
is 1000, so soft limits works. Other axis is same way to test.
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT
BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT