Blue Elephant ELE1212 Manual Download Page 2

Page: 2 / 80

Jinan Blue Elephant CNC Machinery Co.,Ltd

：

[email protected]

Mobile

：

0086-15064026772

Web

：

www.elephant-cnc.com

Thank you for buying our CNC Router.

（Mach3 USB port）

This technical instruction goes with machines, it is also the instructional document which makes sure

you’re correct using. Please read it carefully and keep it well.Please operate the machine according

to this instruction, if any problems or questions, please contact us freely.In order to bring the superior

function of our machine into play, and ensure the safety of the user, please read this instruction carefully

before installation and operating. Then you can have acknowledge in details about what should be paid

attention to, and the parameters of installation and operation, inspection of the abnormality and daily

maintenance rules etc. It is our target to make the customers satisfactory.

Thank you for your

cooperation.

BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT

BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT BLUE ELEPHANT

Summary of Contents for ELE1212

















































































Search results

Summary of Contents for ELE1212

Reviews:

Blue Elephant ELE1212, Manual, Page: 2 / 80

Search results

Summary of Contents for ELE1212

Reviews: