13
Persons with physical, sensory or men-
tal restrictions and children are not per-
mitted to use the dehumidifier.
Every user must have read and under-
stood the operating instructions.
Foreseeable misuse
The dehumidifier must not be used:
•
In rooms with potentially explosive
atmospheres.
•
In rooms with an aggressive atmos-
phere (e.g. caused by chemicals).
•
In rooms with water with a pH value
below 7.0 or above 7.4.
•
In rooms with salt or liquids with a
salt content > 1 %, e.g. brine baths.
•
In wet areas of indoor swimming
pools.
•
In rooms with ozone-treated air,
high solvent concentrations or high
dust pollution.
General safety information
WARNING! Risk of explosion, burns
and poisoning from refrigerants!
The appliance contains an odourless,
flammable refrigerant which, if handled
incorrectly, could result in explosions
and fire as well as injuries and burns.
The refrigerant circuit is pressurised.
Do not use any objects to acceler-
ate the thawing process.
Do not store the dehumidifier in
rooms with permanent sources of
ignition, such as open flames, oper-
ational gas appliances or electric
heaters.
Do not drill open or ignite dehumidi-
fiers.
Only operate the appliance in an
adequately ventilated room larger
than 4 m
2
.
Any work to the refrigerant circuit
must be performed by the manu-
facturer or the manufacturer’s au-
thorised technical personnel. Be-
fore working on the refrigerant cir-
cuit, it must be depressurised using
the designated mechanisms.
Observe the national regulations
for gas installations.
Do not dump refrigerants or dis-
pose of them as household waste.
Avoid coming into contact with the
refrigerant.
WARNING! Electrocution!
Working on live components or water
on live components can cause life-
threatening electrocution.
Avoid contact between water and
live components.
Always switch off and unplug the
dehumidifier and drain away any
water before moving it to another
location.
Only allow the manufacturer or au-
thorised personnel to carry out
work on electric components.
5 Unpacking
Procedure
1. Check that the package contents
are complete. Contact your stockist
in the event of damage or missing
contents.
2. Remove the packaging and dis-
pose of it in accordance with local
regulations.
6 Fitting the transport
handle
The transport handle can be fitted hori-
zontally or vertically as required.
Procedure
1. Undo and remove the four screws
on the transport handle (1).
