VARIOLITE Small Form Factor PC
Installation - Mounting
Page 15
INSTALLATION
Mounting
The unit may be mounted in any orientation, but care must be taken to ensure easy access to any removable
media drive (e.g. USB Device). This includes the installation of cables.
It is imperative that the area around the cooling fan inlet and the venting holes are not obscured. Because of
the single cooling fan, a cable passing on top of the fan inlet could present a significant obstruction to the
airflow. Any restriction will lower the maximum ambient temperature at which the unit will operate. Always
use the fixing screws provided. Using longer screws could cause internal damage.
The chassis is fitted with two sets of M4 tapped holes, on the underside of the unit, to facilitate mounting.
There are two near the front edge of the unit (indicated “B” in Fig 1) and two near the rear edge of the unit
(indicated “A” in Fig 1). These may be used to fix the Single Point Mounting bracket. M4 x 6 countersunk
screws are provided with the bracket if you specified the option with your order.
A
A
B
B
Fig 1