BCT-ETX-C3-XXX
S
INGLE
B
OARD
C
OMPUTER
U
SER
G
UIDE
Further details for these connectors can be found in the next section of
this document
Board Profile:
ETX format 114 x 95mm.
4 mounting holes. Details provided in the next section of this document
The CPU board carries the CPU, North Bridge South Bridge,
SODIMM, BIOS ROM, clock circuits, AC97 Codec, Ethernet
controller and all the CPU required power circuits.
Power
:
5Volt only operation (and 5Vsb if ATX operation required)
On board switching regulator for 1.05 to 1.6V (CPU) and 3V3 IO. All
other rails derived from on board regulators: 2.5V (North Bridge). 1.5V
(+GLT Bus and CMOS), Standby 3V3 (Ethernet & support). All other
devices are driven from 5V.
General and Operational Specifications:
Operating temperature range 0 C to +60 C, -20 C to +70 C Storage
Specially engineered 2mm thermal plate designed to assist cooling of
CPU and North bridge. This plate does not provide cooling in its own
right but acts as a heat spreader for heat-sink/fan cooling. This solution
is required on high end CPU options.
Relative Humidity 5 - 95% non-condensing.
Shock and vibration to conform to light industrial usage
Design to be available for manufacture until at least the end of 2005.
Designed to conform to CE standard (89/336/EEC or later) in a
representative enclosure.
Operating System Support:
Windows NT Embedded, Windows XP Embedded, Windows CE.net,
Embedded Linux, Embedded QNX and desktop Operating Systems.
Windows CE.NET to boot from storage devices using FastBoot utility.