Blue Bird VISION 2011, Driver'S Handbook Manual

Page: 72 / 140

VISION
D R I V E R S H A N D B O O K
70
2. Proceed around the left side (Driver’s side) of the bus.
2.1 Check the front left tire. Check for proper inflation pressure. Check
the tread depth, and look for any signs of physical damage. Normal
tread wear should be uniform across the width of the tread. Inspect
the rim for bends or other damage. Check that all lug nuts are in
place. If the bus is equipped with oil lubricated axles, check the sight
glass in the center of the hub for proper oil level.
[WARNING]
Tire inflation pressure must not exceed the specifications of the
tire and/or wheel rim manufacturer for the application. The inflation pressure
embossed on the tire sidewall does not take the wheel or rim capacities into
consideration. Tires should not be inflated above the pressure listed on the
Federal Certification plate without consulting your tire/wheel distributor.
2.2 Check the Stop Arm for any signs of physical damage.
2.3 Open the battery compartment door and inspect the batteries.
Check for corrosion on the battery terminals and for loose connec-
tions. Close the compartment and make sure it is secure.
3. Step back for an overall view of the left side.
3.1 Check that all markings are legible and in good condition, including
emergency exit signs and reflective tapes.
3.2 Check for broken windows and any other signs of vandalism.
3.3 Check that all windows are clean.
ü Markings in good condition.
ü Windows clean & in good condition.
ü Batteries secure.
ü Terminals secure & corrosion free.
ü
Stop Arm in good condition.
ü Tire condition & pressure.
ü Lug nuts, axle oil level.