background image

1 866 907 0122     blubathworks.com

2016-06

 1

Attention — Before Installation

Thank you for choosing from among Blu’s quality line of products. We recommend that you carefully read this installation 

guide to ensure your vanity’s proper operation and reliability for many years to come.

NOTE

: Product is already optimized/preset for best drawer fitting - only minor adjustments may be needed

Adhere to all local building and plumbing codes. The diagrams in this guide are not construction plans. They are visual 

aids. 

Installation Requirements

Please read the instructions carefully so as to avoid any damage to the fixture.

1. To ensure this product is installed properly, you must read and follow these guidelines.
2. The owner/user of the product must keep this information for future reference.
3. Consult local building codes to make sure the installation complies with standards.
4.  Remove the unit from its packaging. Before disposing of it, inspect the unit to make sure its in good shape. Should 

inspection reveal any damage or defect in the finish, contact your distributor. The warranty does not cover damages or 
defects in the finish once it has been installed. Blu Bathworks’ responsibility for shipping damages ceases upon delivery 
of the product in good order to the carrier. All complaints regarding damage due to transport must be made directly to 
the carrier.

5. Place the unit in the bathroom before you start working. Conserve all nuts and bolts.
6.  To protect the unit during installation, we recommend that you lay a piece of cardboard on the bottom.
7.  If the unit is covered with polyethylene protective film, do not remove until installation is complete to grant maximum 

protection. However, remove film where any two surfaces will be in permanent contact.

8.  Verify that all dimensions on the plan are the same as the ones of the unit.

Installation Notes

 

Important! Install this product according to the installation guide. 

Supplied:

Technical Support Assistance

 

If further assistance is required, please contact:

Product Support at 1.866.907.0122 (09:00 – 17:00hrs PST) or email [email protected]

North America

Blu Bathworks Inc.
188 Smithe Street,Vancouver, BC, Canada, V6B 6A9
T +1.604.299.0122  F +1.604.299.0125

Please refer to blubathworks.com for warranty, terms & conditions under warranty & procedure for warranty service.

dowel for plaster x2

 (700, 900,1200)

dowel for plaster x4

 (1400,1800)

hanger & screw x2

 (700, 900,1200)

hanger & screw x4

 (1400,1800)

screw x2

 (700, 900,1200)

screw x4

 (1400,1800)

Summary of Contents for 1200 Series












Reviews: