FLOOR STANDING WATER BOILERS
MOD. SIMPLEX
n.1460080EN 07-2009
4
2
BUILDING CHARACTERISTICS
The
SIMPLEX
boilers are pressurized combustion heat exchangers made of steel with inversion flame
type and successive turn in the tube system.
The high speed of the fumes inside the tubes and the high turbolence provoked with the new
TURBOLATORS IN STAINLESS STEEL AISI
430, favours the heating exchange, decreases of the
consumption, increasing the combustion yeld that reachs an efficiency over 90%.
The jacket consists of elegant panels in steel painted with epoxy powder paint, and is totally insulated
with rock wool in order to give it high an heat insulation characteristics.
The power losses on the smoke side are so limited as the allow a wide range of choice for operation
with gas oil-fire burners with forced air.
The front door hinge-mounted it’s insulated inside with ceramic fiber to be resistant high temperature
and take the functions:
§
fumes reversal chamber
§
furnace and tube system inspection and cleaning
§
burner support
The control panel is complete with all the instruments necessary to optimise the control and the
correct operation of the boiler.
The boiler body is made of iron and completely is welded with procedure mag (metal-arc active gas),
arc welding in active gas atmosphere with electrode fuse.
In order to ensure maximum quality and reliability over time, all the boilers are subjected to testing
under severe conditions during all the phases of the production.
The shelves are checked and tested hydraulically at 4,5 bar.
The maximum working pressure is 3 bar.
