Assembly instructions: Hera Direct
+
5
Assign multiple ports to a thermostat
Repeat these steps to assign several ports to a thermostat.
The Hera thermostat is supplied from the factory for use with the radio-controlled
underfloor heating bars (Version 1) and must be converted for use with conventional
actuators (Version 2).
Thermostat shows the
current room temperature
etc.
Press the sleep button until the thermostat shows the last
registered port
After a short time, „SET“
appears
Press the „Sleep“ button
again
Use the arrow keys to
select the desired port
1.
2a.
3.
4.
2b.
5.
Thermostat shows „Suc“ ->
Registration was successful
Press the „Sleep“ button to
confirm the port
Thermostat shows the
current room temperature
etc.
7.
8.
6.
