Assembly instructions: Hera Direct
+
3
In combination with Hera+ Primus
PRO/
Hera+ Extensia PRO (Version 1)
Wire the thermostat as
shown in the connection
diagram (230V)
“REG” appears in the display Press the “Register” button
on the Hera+ Primus PRO bar
Connection of the Gateway GT-100
Screw on the antenna
Connect power supply unit
Connect the network cable
Both diodes light up
permanently: Gateway active
Check status
Green diode lights up constantly: Internet
connection is establishing.
Green diode lights up constantly: Internet
connection is successfully established
1.
2.
3.
4.
5.
1.
2.
3.
Hint:
Functionality in the home safe area. Internet
connection is used for convenient setting
and control via smartphone.
The system functionality is guaranteed even
if no Internet connection is available.
Register the Hera thermostat and assign port