4
3
X1
A1
ROUTER
1
3
4
LAN
WAN
2
X1
E1
HARDWARE INSTALLATION:
FOLLOW THE STEPS BELOW SET UP YOUR HOME MONITORING STARTER KIT:
1. Take the XG1000 Controller AC Power Supply
[A1]
from your Controller box.
Plug the small end into the port marked Power on your XG1000 Controller
[X1]
and plug the other end into an AC electrical outlet.
2. Connect supplied Ethernet Cable
[E1]
to the LAN Ethernet port of the XG1000 Controller
[X1]
and connect the other end to a free Ethernet port on your router.
3. Connect one end of the Ethernet Cable
[E1]
to the LAN port of the IPC-1000 IP Camera
[C1]
.
Connect the other end to a second free port on your router.
NOTE:
You can also connect cameras located in any room with an electrical outlet to your
router via optional HomePlug Turbo PLC Ethernet Adapters (sold separately).
4. Plug the small end of the AC Power Supply
[A2]
into your IPC-1000 IP Camera
[C1]
AC Adapter port and the other end into an AC electrical outlet.
Example of completed configurations can be found below.
2
ROUTER
(NOT INCLUDED)
INTERNET
XG1OOO CONTROLLER
X1
DSL/CABLE MODEM
(NOT INCLUDED)
1
3
4
LAN
LAN
WAN
A1
E1
COMPLETED CONFIGURATION
2
ROUTER
(NOT INCLUDED)
VIDEO TRANSMITTED OVER
POWER LINES VIA PLC ETHERNET ADAPTERS
INTERNET
XG1OOO
CONTROLLER
PLC
ETHERNET
ADAPTER
PLC
ETHERNET
ADAPTER
DSL/CABLE MODEM
(NOT INCLUDED)
IPC-1000
IP CAMERA
1
3
4
LAN
LAN
WAN
COMPLETED CONFIGURATION USING OPTIONAL PLC ETHERNET ADAPTERS (SOLD SEPARATELY)
2
ROUTER
1
3
4
LAN
WAN
C1
E2
A2
C1
IPC-1000 IP CAMERA
C1
E3
A2
Summary of Contents for Home Monitoring Starter Kit
Page 1: ...STARTER KIT USER S MANUAL...