background image

25 

SERVICE PARTS LIST 

Nut w/ Lockwasher                       S0311 
Nut, Nylon 1/2-13                         S0313 
Nut, Hex SS 6-32 x 5/15              S0316 
Nut, NS 4-40 SS                           S0343 
Screw SS 6-32 x 1/4                    S0434 
Screw SS 6-32 x 3/8                    S0435 
Screw SS 10-32 x 3/8                  S0444 
Washer SS .187 ID                      S0514 
Washer SS .500 ID                      S0518 
Washer Nylon .171 ID                  S0536 
Panel Assy, Left Side                   S10036 
Bracket, Vac (Model 9454)           S10060 
Harness LNC/Relay                     S10191 
Elbow, Hopper Outlet                   S10394 
Ballast, 7W 12V                            S10512 
Cover, Ballast                               S10543 
Vavle, Solenoid 120V                   S10658 
Transformer 115/230V 25A          S10709 
Fuse, 1A 250V, Axial Leads         S11141 
Fuse Assy 1Amp                          S11142 
Diverter, Spout                             S11594 
Kit, Disp. Valve (for S1330)          S1160 
Switch, Heater 

ON

/

OFF

                  S1327 

Valve, Disp                                   S1330 
Knob                                             S1335 
Cap, Drain                                    S1347 
Nut, Brass 61F 1/4 x 1/4              S1351 
Hose Clamp                                 S1369 
Plug, Drain Tubing                       S1443 
Whipper Motor                              S1728 
Clevis                                           S1755 
Auger Motor                                 S1943 
Cable Mount                                 S2012 
Cable Tie                                      S2013 
Switch, 

WATER

 

LINE

/

PPORTABLE

     S2017 

Stub Shaft                                    S2042 
Blower  Motor                               S2316 
Bushing, Flange ND-14                S2319 
Hose Clamp                                 S2380 
Tinnerman, 1/2 OD                       S2558 
Coil, 120V                                     S2841 
Connector                                     S2850 
Elbow, Female                             S2951 
Nut w/ Collar, Jaco #P-PG-4        S3043 
Switch, 

FLUSH

/

DISPENSE

                S3091 

Auger Spring (Heavy 4.7-3.3 gr)  S3271 
Kit, Repair Inlet Valve                   S3305 
Plate, Regulator Mounting            S3308 
Base, Blender                               S3345 
Mixing Chamber                           S3346 
Seal                                              S3347 
Fitting, Plastic “Y”                         S3399 
Fitting, Vend Valve                       S3410 
Whipper Blade                              S3436 
Hinge, Half-Loose Leaf                S3448 
Tubing, Drain                                S3461 
Power Cord                                  S3693 
Strain Relief                                  S3694 
Whipper Spacer                           S3814 
Washer, Rubber                           S4089 
O-Ring                                          S4211 
Thermostat, Hi-Limit                     S5084 
Overflow                                       S5336 
Inlet tube                                      S5337 
Thermostat, Temp Control           S5611 
Boot, Toggle Switch                     S6145 

Sensor Board                               S6317 
Foot Bumper (pk 10)                    S6334 
Spacer, Hopper                            S6335 
Slinger, Whipper                          S6340 
Nut, Hopper Bearing                    S6363 
Elbow                                           S6367 
Hopper Bearing, Modified            S6374 
Funnel                                          S6399 
Fitting, Plastic “T” 3/8                   S6440 
Water Line, 1/4 x 16-3/4               S6442 
Waterline tubing                           S6522 
Auger Spring (Light 2.4-4.0 gr)    S6729 
Cover Assy, Portable                   S6805 
Light Bulb (Fuse Shaped)            S7006 
Inlet Valve                                    S7213 
Blower Housing                            S7430 
Blower Wheel                               (P-18) 
Header, Ribbon Cable, 4-Pin       S7720 
Flow Adjuster                               S8321 
Indicator Light                              S8347 
Transformer                                 S8493 
Auger Spring (Std 4.1-4.6 gr)       S8501 
Bracket, Prod Motor Mounting     S8517 
Switch, 

HOT

/

COLD

 

HOT

/

HOT

           S8539 

Panel, Top Assy                           S8564 
Tubing Assy (Model 9456)           S8570 
Flow Adjust Valve                        S8576 
Stand Tube                                  S8584 
Wiring Harness (New Style)         S8589 
Support, Circuit Board                  S8626 
Strain Relief                                 S8637 
Plate/Vent Tube Assy                  S8653 
Funnel Cap                                  S8775 
Tubing, Silicone (18”)                   S8785 
Fitting, SS “T” 1/4 NPT                 S8797 
Kit, Relay Board Upgrade            S8806 
Plug                                              S8860 
Heater                                          S8861 
Fitting, Cabinet Drain                   S8862 
Cable                                            S8864 
Probe Assy                                   S8870 
Agitator Wheel                             S8871 
Tubing Assy (Model 9454)           S8877 
Tab, Faston Adapter 187             S8889 
Harness, Door Light Direct           S8890 
Hopper Mounting Tray (9454)      S8990 
Label, 

CLEANING

 

INSTRUCTIONS

     S9097 

Adjuster, Water                            S9184 
Restrictor Flow Cap                     S9236 
Hopper Only (Mod.9454,Rt)         S9247 
Hopper Only (Mod.9454,Lf)         S9248 
Hopper Only (Mod.9456)             S9249 
Harness, Door/Timer LG              S9252 
Bushing, Flared                            S9347 
Block, Flow Adj Assy                    S9422 
Membrane Switch (Mod. 9454)    S9448 
Membrane Switch (Mod.9456)     S9449 
Washer, Fiber                              S9489 
Board, PC Relay Assy                 S9820 
Blower, Vacuum Assy                  S9895 
Magnet, Door                               S9898 
Lampholder                                  S9918 
Lamp, Fluorescent                       S9920 
Bracket, Vac (Model 9456)          S9930 
Tank                                             S9964 
Plate, Door  Liner                         S9975 

Panel, Right Side                          S9976 
Hopper Mounting Tray (9456)      S9984 
Waterline Strainer                         SA 9052 
Door, Plastic                                 83052 
Nut, Hex 6-32                               83393 
Screw, 8-32 x 1/4                          83394 
Lockwasher, Internal SS #8          83395 
Drip Tray Assy                              83460 
Door Shell, Metal                          83472 
Fitting Comp to FPT                     83484 
Fitting Comp to MPT                     83485 
Kit, Upgrade Tank Fitting              83598 
Kit, Tank Drain                              83655 
Door Assy (Mod. 9454)                 83663 
Door Assy (Mod. 9456)                 83665 
Kit, Lamp/Ballast/Fuse                  83756 
Door Complete, Metal 9454          84118 
Door Complete, Metal 9456          84119 
 
ACCESSORIES 
Faceplate, Clear                           S8475 
Faceplate, Cappucino                   83975 
Faceplate, Cafe Elite                    82319 
3# Hopper Assy (Model 9456)      S9032 
5# Hopper Assy, Rt (Mod.9454)   S9348 
5# Hopper Assy, Lt(Mod.9454)     S9349 
Lid, Hopper (Model 9454)             S9349 
Lid, Hopper (Model 9456)             S9622 
Bottled Water Kit                           6543 
Vent Spout Assy, Portable Bottle S8351 
Cap, Bottle                                    S8352 
Label, Hot Flavor Designation      S8947 
 
Flavor Label (pk 18) 
     Amaretto                                   82964 
     Hot Chocolate                           82965 
     Iced                                           82966 
     Decaf                                        82967 
     White Chocolate                       82968 
     Hazel Nut                                  82969 
     American Almond                     82970 
     Cappucino                                82971 
     Hot Cocoa                                 82972 
     Coffee                                       82973 
     Mocha                                       82974 
     Banana Nut                               82975    
     French Vanilla                           82976 
     Espresso                                   82977 
     Irish Creme                               82978 
     Hot Cider                                  82979 
     Choc. Raspberry                       82980 
     Vanilla Cream                           82981 
     Sugar Free                                82982 

Summary of Contents for 9454































Reviews: