Bloomfield 9454, Owner'S Manual

Page: 18 / 30

SERVICING INSTRUCTIONS
16
CAUTION:
SHOCK HAZARD
Opening access panels may
expose uninsulated electrical
components.
Disconnect dispenser from
electrical power before
removing any panel. Do not
attempt to repair or replace
components without first
unplugging the power cord.
Use caution when adjusting
water flow rates or testing
voltages with power applied to
the unit. Electrical shock can
cause injury or death.
HOT WATER ADJUSTMENT
The desired taste of product being served is obtained by
adjusting the water flow screw .
NOTE:
When making the adjustment the selector switch must be
in the HOT/HOT position.
Each blender system has its own hot water dispense valve for
located behind the blender assembly.
1. Locate the Phillips head screw with the white washer
behind the screw. This is the water flow adjustment.
2. RICHER (less water):
Turn the screw head clockwise and press the screw head
firmly onto the white washer.
LEANER (More water): Turn the screw head counter-
clockwise and press the screw head firmly onto the white
washer.