CMTS Edge Series Universal Quick Start Guide
P a g e
|
15
online(pt) - The CMTS received a valid BPI TEK request and responded to it. BPI encryption is established
and the CMTS is forwarding NSI traffic to and from the CM (DOCSIS 2.0).
b-online or b-online(pt) -
A “b
-
” prepended to one of the online CM states means that the CM is
operating normally in a bonded downstream and/or upstream mode (DOCSIS 3.0).
If the modem had any bonding related failures that resulted in some degree of partial functionality there
would be a special status value for that.
w-online or w-online(pt) -
A “w
-
” prepended to one of the online CM states means that th
e CM is
operating normally in a wideband downstream configuration and/or upstream mode (DOCSIS 3.0).
f-online - An f- prefix before one of the online CM states indicates that the CM is online but failed
bonding during initial ranging.
p-online - The p- prefix before one of the online CM states means that the CM is in partial operation
with some impairment to one of the channels.
reject(c)
–
The CMTS has rejected the configuration in a registration request. This could be for many
reasons, including but not limited to format errors, insufficient reserved bandwidth, insufficient internal
resources, timestamp check validation error, bad config file, etc.
reject(na)
–
The CMTS has rejected a CM initialization because it never received a DHCP REG-ACK.
Modems that have been powered off or otherwise removed from service (e.g., moved to another CMTS
in a load balancing operation) have the following status:
offline - The CMTS is not receiving any ranging requests from the CM.