12
Clearview 4:2
User Manual
5.2 “System” Screen (continued)
Transcoder Ethernet Settings
This section allows the user to individually configure the network settings for each numbered transcode pair (XC1 to XC12).
14
Figure 5.2 - “System” Screen - Full View
1
6
7
8
9
12
13
10
11
2
3
4
5
14
Command/Control Ethernet Settings
Unit Name:
a user-defined field to more easily identify the unit by name.
The character limit is 64 alphaumeric, however
if other character types are used, the display limit is decreased and may truncate.
Unit Location:
a user-defined field to more easily identify the unit's location.
The character limit is 64 alphaumeric,
however if other characters types are used, the display limit is decreased and may truncate.
MAC Address:
the Media Access Control (MAC) Address is a read-only field that serves as a unique identifier assigned
to the network.
IP Address:
the static IP address that is assigned to the unit, allowing the user to access it via the web interface. Pressing
the IP reset button temporarily returns unit to factory default of 172.16.70.1.
Subnet Mask:
the subnet mask allows the user to access the unit from another network via the web interface. Factory
Default is 255.255.255.0 for local subnet.
Default Gateway:
the gateway address of unit, allowing the user to access it from another network via the web interface.
The gateway address should be in the same subnet as IP Address.
Primary DNS:
the primary Domain Name Server (DNS) hosts the controlling zone file, containing all the authoritative
information for a domain.
Secondary DNS:
the secondary Domain Name Server (DNS) contains read-only copies of the zone file, and gets its info
from a primary server in a communication known as a zone transfer.
11
12
13
6
7
8
9
10
Remember to click on the “Apply Settings” button to apply the new values/configurations.
Summary of Contents for Clearview 4:2
Page 21: ...21 Clearview 4 2 User Manual ...
