background image

- Never leave an open fire unattended at any time !
- CAUTION: Item gets hot while in operation. Do not touch the fireplace while burning. Please allow at 
least 15 minutes to cool down before touching the product after flame is extinguished.
- Never pour fuel into an open flame or into the burner reservoir unless it has cooled down for at least 15 
minutes after use.
- The design and / or construction of the fireplace or any part therein must not be modified.
- The fireplace is not suitable for heating purposes.
- Do not store more than 5 litres / 1,3 gallons of flammable liquids in your apartment.
- Keep fuel containers closed tightly.
- Keep fuel away from children and animals.
- Fuel must not be exposed to direct heat such as direct sunshine or central heating.
- The burning reservoir must not be exposed to direct heat such as direct sunshine or central heating.
- Do not place any flammable material within 1 Meter / 40 inches around the fireplace. A safety distance 
of at least 2 meters / 80 inches should be kept from any window or curtain. 
- Product should not be used with a mantle and shelving should be minimum of 1 Meter / 40 inches from 
the fireplace.
- Do not place any flammable material on the fireplace! 
- Do not place decorative items such as wood logs, stones, artificial logs etc. Into the flame or within 1 m 
/ 3 ft around the operating fireplace
- Ethanol fireplaces must not be used to prepare food ! 
- CAUTION: Do not smoke while handling the fuel.
- Avoid draught in the room where the fireplace is operated.
- Make sure to keep a safety distance of 0,5 m / 20 inch from the burning fireplace.
- Children and pets must be kept clear from the burning fireplace!

Assembly:

- Please remove all packaging and information material before assembly.
- WARNING: Do not pack required air spaces with insulation or other materials. 

Assembly, fireplace 65169:

- Before placing the fireplace on the floor make sure that the designated surface is even and ensures that 
the fireplace stands solid.
- The fireplace 65169 must be placed in a position where it is protected against unintentional touching 
and overthrowing.  It must not be placed within direct walking routes and narrow passages.
- In case of the burning fireplace being overthrown there is a severe danger due to leakage of the fuel.
- Install the safety compartment together with the burner reservoir (B) into the burning chamber of the 
fireplace body (A) (illustration 8). 
- The opening of the burner reservoir must face to the front.
- Fit the grill (C) onto the burner (illustration 9).

Assembly, fireplace 65170:

- The fireplace must only be installed on a solid wall of non flammable material.
- Mount the mounting bar unit (D) to the wall using the 2 screws (E), 2 washers (F) and wall plugs (G) 
supplied (illustration 4). On a wooden wall please mount the bar to wall studs. The supplied mounting 
hardware suits walls out of stone, brick and concrete. For all other walls (i.e. wooden), different mounting 
hardware should be used. Seek advice of your local hardware store if you are unsure which mounting 
hardware suits your wall. 
- Attach the fireplace body (A) onto the mounting bar unit (D)  (illustration 5).
- Install the safety compartment together with the burner reservoir (B) into the burning chamber of the 
fireplace body (A) (illustration 6). 
- The opening of the burner reservoir must face to the front.
- Fit the grill (C) onto the burner (illustration 7).

Fireplace CHIMO, Instruction Manual / Safety Instructions

US 03

Summary of Contents for 65169





















Reviews: