42
Programme is in rinse and hold
3
You can see this from the blinking of
the >Rinse hold< indicator lamp and
the >Start/Pause< button.
If you now want to
spin
:
1. Set spin speed.
2. Press the >Start/Pause< button.
The programme continues, pumps out
the water and spins.
If you want to
pump out
the water:
1. Set spin speed selector to >No spin<.
2. Press the >Start/Pause< button.
The programme continues and only
pumps out the water.
Re-spinning the laundry
3
The automatic spin-correction-system
can prevent spinning in case the drum
is out-of-balance.
If you wish to spin again:
1. Rearrange the laundry evenly in the
drum.
2. Set programme selector to >Spin<.
3. Set spin speed.
4. Press the >Start/Pause< button.
After the programme cycle is
completed
1. If the >Door< indicator lamp is on,
open the loading door and remove
your laundry.
2. Press >On/Off< button.
3. Turn the water tap off.
4. Wipe out the fold in the rubber seal on
the door and check for foreign ob-
jects.
5. Leave door and detergent dispensing
drawer open to dry.
