40
Changing the delay time
If you want to change the time during the
countdown:
1. Press the >Start/Pause< button.
2. Use the >Time delay<
15
button to set
the desired time delay.
3. Push the >Start/Pause< button. The
time delay countdown phase begins.
Cancelling the time delay
If you want to cancel the time delay count-
down and start the programme immedi-
ately:
1. Press the >Start/Pause< button.
2. Press the >Time delay<
15
button sev-
eral times, until the
15a
indicator lamp
goes off.
3. Press the >Start/Pause< button to start
the programme.
Progress of programme
This row of indicator lamps shows the
progress of the currently running pro-
gramme.
3
Each indicator lamp goes on at the be-
ginning of its section of the pro-
gramme cycle and goes out at the end
of the programme cycle. The
bottom
most
lamp tells you current status of
the programme.
Example:
The indicator lamps for
>Main wash<
14b
and >Rinse<
14c
are
on: The machine is currently in the
rinse cycle.
>Prewash<
The indicator lamp
14a
glows at the be-
ginning of the pre-wash cycle – if a pro-
gramme with pre-wash was selected.
>Main wash<
The indicator lamp
14b
glows at the be-
ginning of the main washing cycle.
>Rinse<
The indicator lamp
14c
glows at the begin-
ning of the rinse cycle.
>Softener<
The indicator lamp
14d
glows at the be-
ginning of the soft rinsing cycle.
>Spin<
The indicator lamp
14e
glows at the be-
ginning of the final spin cycle – after the
soft rinse cycle or in the special pro-
grammes for >Spin< and >Drain<.
3
If the machine isn't spinning, the pro-
gramme may be in rinsehold.
Or the automatic spin correction sys-
tem has been activated due to exces-
sive imbalance.
>Start/Pause<-button
A programme can be interrupted by press-
ing the
19
button. The button then blinks.
To continue the programme, press the
19
button again.
14a
14b
14c
14d
14e
19
