![background image](http://html1.mh-extra.com/html/blomberg/dwt-52800-ssih/dwt-52800-ssih_user-manual_2773913028.webp)
25
USA
Information Line. Time Delay
indicator will turn off at the end
of the cancellation process and
delaying process is cancelled.
C
You can select and start a
new programme following
the cancellation of Time
Delay function.
C
Time Delay function can not
be set after the programme
starts.
6.5 STARTING THE
PROGRAMME
To start your machine after selecting
the programme and auxiliary functions,
press Start / Pause / Cancel key.
Once the programme starts a tune
is played and the estimated time
remained to the end of the programme
will appear on the Display Information
Line. Start / Pause / Cancel indicator
starts lighting continuously.
C
If the door is opened while
the machine is running, the
machine will switch to the
standby mode. Close the
machine door and press
Start/Pause/Cancel button.
The programme will resume.
C
Your machine performs
water softening depending
on the hardness level of the
supply water. Remaining
time displayed towards the
end in some programmes
can be different from
the time indicated at the
beginning due to this
process. The total time
can also change while
the programme is running
depending on the ambient
temperature where your
machine is installed,
temperature of the supply
water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when it
is running. Stop the machine
by pressing Start / Pause /
Cancel key if you have to
open the door. Then, open
the door of the machine.
There may be a rush of
vapour when you open the
door of your machine; be
careful. Close the door of
your machine and press
Start/Pause/Cancel key
again. Programme will
resume running.
C
The machine will remain
silent in pause mode for
some time in order to
remove the water in the
machine and on the dishes
completely and to have the
water softener cleaned, and
then it will resume running in
drying mode.