![background image](http://html1.mh-extra.com/html/blomberg/dwt-52800-ssih/dwt-52800-ssih_user-manual_2773913039.webp)
36
USA
10.4 CLEANING THE HOSE
FILTER
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust,
etc.) can be prevented by means of the
filter attached to the water inlet hose.
Check the filter and the hose regularly
and clean them if necessary.
1. Turn off the tap and remove the
hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its
seat in the hose.
4. Install the hose to tap.
(Select Models)
LOWER WASH ARMS
Check if the holes on the lower
wash arms (1) are clogged. If they
are clogged, remove and clean the
impeller. Pull the lower wash arms up
to remove it.
UPPER WASH ARMS
Check if the holes on the upper
impeller (1) are clogged. If they are
clogged, remove and clean the wash
arms. Turn its nut to left to remove the
upper wash arms.
Make sure that the nut is tightened well
when installing the upper wash arms.
10.5 CLEANING THE WASH
ARMS
Clean the wash arms at least once a
week in order for the machine operates
efficiently.