![background image](http://html.mh-extra.com/html/blomberg/dic-2440/dic-2440_instruction-manual_2774309008.webp)
EN
8
8
PREPARATION OF THE FRAME FOR THE HOOD IN RE-
CYCLING VERSION
In case the hood is used in recycling version it is neces-
sary to prepare the frame with all the necessary connec-
tion pieces. In order to make the installation easier it is
necessary to lengthen the frame:
• Unscrew the two screws
2.1
fixing the upper chim-
ney to the frame and pull the chimney out.
• Unscrew the four safety screws placed at the top in
the frame separation area. (
A
).
• Unscrew the eight metric screws connecting the two
columns, placed on both sides of the frame (
B
).
Installation of components in recycling version:
• Fix the recycling air outlet piece
15
to the upper part
of the frame using four
12c
screws supplied with the
hood.
• Fix the flange (ø120)
10
to the lower part of the recy-
cling air outlet
15
.
• Put the reducer flange
9
on the hood body outlet.
• At this point, join the flanges with a pipe. In order to
calculate the height of the pipe it is necessary to es-
timate the height of the hood (mm) and subtract 615
mm. (H pipe = H hood-615).
• Lengthen the frame so that the pipe can be inserted.
Place the pipe between the two flanges and block it.
Make sure that the height of the frame is correct con-
sidering the height of the cooker hood (H frame = H
hood – 184). Adjust the height of the frame and
tighten again the earlier removed screws. Tighten
again the safety screws in order to give more stability
to the structure.
• Fix the pipe with the pipe clamps
25
supplied with
the hood.
A
B
15
12c
10
Summary of Contents for DIC 2440
Page 1: ...Cooker hood Dunstabzugshaube DIC 2440 Instruction Manual Bedienungsanleitung ...
Page 74: ......
Page 75: ......
Page 76: ...436005565_ver1 www blomberginternational com ...