![background image](http://html.mh-extra.com/html/blomberg/dic-2440/dic-2440_instruction-manual_2774309009.webp)
EN
9
9
FIXING THE FRAME
• Lift the frame up, making sure that the index over the frame
plate is turned forwards.
• Fit the frame slots onto the two screws inserted in the ceiling as
above, and turn until reaching the centre of the adjustment slot.
• Tighten the two screws and fasten the other two screws pro-
vided; before locking the screws completely, it is possible to
adjust the frame by turning it, making sure that the screws do
not come out of their housing in the adjustment slot.
• The Frame must be securely fastened so as to support both the
weight of the Hood and the stress caused by occasional axial
pressure against the fitted Appliance. After fixing, make sure
that the base is stable even when the Frame is subjected to lat-
eral stress.
• If the Ceiling is not strong enough in the area where the hood
is to be fixed, the Installer must strengthen the area using suit-
able plates and counterplates anchored to resistant structures.
2
1
1
2
Ducted version air exhaust system Connection
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 120 mm,
the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert the re-
ducer flange
9
on the hood body outlet.
• Fix the pipe using the pipe clamps
25
(not provided).
• Remove any activated charcoal filters.
9
ø 120
ø 150
Summary of Contents for DIC 2440
Page 1: ...Cooker hood Dunstabzugshaube DIC 2440 Instruction Manual Bedienungsanleitung ...
Page 74: ......
Page 75: ......
Page 76: ...436005565_ver1 www blomberginternational com ...