EN
23
10
Descaling the machine
When the message “DESCALING”
appears on the display with the
machine off, it is time to descale
your machine using specific
products that are appropriate for
coffee machines.
Attention - Very Important!
Do not use lemon-based products
for descaling. These products
contain citric acid, which in
contact with calcium at high
temperatures forms a chemical
reaction, creating calcium citrate
that could lead to the total
obstruction of the water circuits.
Proceed as follows:
Open the drawer and remove the
water from the tray and any coffee
grounds from the container. Re-close
the drawer without replacing the grille,
and position the steam nozzle so that
the water that comes out of it falls into
the tray.
• Switch on the machine and wait till
the words WATER and STEAM have
stopped flashing.
• Switch off the machine and go into
programming mode by pressing the
key
until the displays shows
“PROGRAMMING”.
• Select the descaling function
using the keys
and
“DESCALING”
appears on the
display panel.
• Press and hold the two keys
together and then press
• The machine prepares for
descaling. When you hear the
beep of confirmation, the message
DESCALING STAGE 01
appears
on the display.
DESCALING STAGE 01:
Fill the tank
halfway full with the descaling product
then press button .
DESCALING STAGE 02:
keep the
steam button pressed.
DESCALING STAGE 03:
machine
starts to delivery water from nozzles.
DESCALING STAGE 04:
refill water
tank with fresh water, Press button .
DESCALING STAGE 05:
machine
starts cleaning cicle.
Press the steam button,
fill the tank
with water and wait until the coffee
and water temperatures are reached.
The manufacturer declines all
responsibility for any damage
caused by failure to carry out
descaling.
IMPORTANT: machine provided
with direct water supply mast be
plumbed according to regional
rules, with main tap, retaining
valve, 150micron filter.