![background image](http://html1.mh-extra.com/html/blomberg/brfb1920ss/brfb1920ss_installation-instructions-manual_2774155009.webp)
CONFIDENTIAL
8
The appliance is provided with a NEMA 5-15 P plug and a 3-pin power cable which is in the UL list and ready to be
connected to a 120 V, 60 Hz power supply. Fuse is 15 A. The appliance must be connected to a 3-pin socket. The plug
must be installed only by a licensed electrician.
If the electrical wiring or the electric power supply of the house needs alteration, the necessary procedures must be
performed by a qualified electrician.
ATTENTION:
Do not install you refrigerator:
In open areas
In environments where water is dripping
In environments where temperature is lower than 55° F (0°C)
Furniture:
Make sure that the furniture where you will install the appliance has been safely mounted in your kitchen. Your
furniture must be connected to the floor and the wall properly and with suitable connections.
For the best installation, clearances between the furniture and the product must be in compliance with the values
specified in the installation instructions.
Side walls must be free of clearances and their surfaces must be flat.
Minimum thickness of the side walls must be 5/8" (16 mm).
Minimum thickness of the doors to be attached to the product must be ¾" (19 mm) .
ATTENTION:
There is a stainless steel door and stainless kick plate option. Please consult the authorised service.
Ventilation:
Vent holes where the air enters and exits the unit must not be blocked or obstructed. In addition, you must
periodically clean the dust and dirt that accumulate on these holes in time.
Combining Kit:
There is a combining kit if you wish to use the two refrigerator combined next to each other. If you are going to use
them side by side, you will need to demand this kit separately from the authorised service. (Please see "Dual Cabin
Installation" for detailed information)
Summary of Contents for BRFB1920SS
