Blomberg BRFB1920SS, Installation Instructions Manual

Page: 7 / 118

CONFIDENTIAL
6
Product Information:
As illustrated in the figure below, you can see the Barcode Level at the top right corner of the FRZ Compartment.
Installation Place
You must follow the instructions below:

The floor on which the product will be installed must be capable of bearing 1,200 pounds (544 kg) minimum.

Kitchen floor and the bottom of the product must be at the same level. Otherwise, problems may occur with
the air suction of the product.

There must be no objects preventing the installation of the product at the back and on the side walls of the
product's installation place.

The power socket must be at the correct place.

Dimensions of the furniture where the product will be installed must be in strict conformity with the
dimensions given in the manual.

Do not install the product with the fridge and the freezer are adherent next to each other. Otherwise,
condensation and damage may occur in the product. (Please see "Dual Cabin Installation" for detailed
information)

Flatness of the floor where the product will be installed must be checked with a Bubble Level Tool.

Installation area must not be subjected to direct sunlight and it must be away from heat sources, ovens,
radiators etc.