8
7
Bloomberg Professional
service configuration
Bloomberg
BSAT enrollment
Keyboard installation
Keyboard setup
1. Download and Install the Bloomberg Professional Application from
http://www.bloombergsoftware.com
2. Launch the Bloomberg Professional application.
3. Type
Alt-D
to bring up the Terminal Defaults menu.
Note: You do not need to be logged in to adjust this setting.
4. Select the
General
tab.
5. From the Keyboard Type drop-down menu, select Bloomberg Keyboard.
6. Click
OK
.
The Bloomberg Keyboard 5 BSAT device has been designed with a touch
sensor to be used with any finger on the right or left hand. If you are
upgrading from the Bloomberg Keyboard 4, you will be asked to re-enroll.
If you would like to change your enrolled finger, contact Global Customer
support to have your BSAT enrollment reset. At the next login, you will be
prompted to go through the enrollment procedure.
To enroll using Bloomberg Secure Access Technology,
take the following steps:
1. Starting the enroll process:
a.
If you are already logged into the Bloomberg Professional Application:
to start the enroll process.
b.
If you are not logged into the Bloomberg Professional Application:
Launch the Bloomberg Professional application.
Press the
Enter
key to bring up the login page.
Enter your Login Name and Password.
1. Connect the USB cable to an available PC or self-powered
hub USB port.
2. Allow Windows to install the device drivers.
3. If upgrading from a previous Bloomberg Keyboard,
restart the Bloomberg application.
