Blohm + Voss Oil Tools 9G-3570AIR, Technical Documentation Manual

Page: 2 / 71

2
GENERAL INFORMATION
Warnings and Notes
WARNING: A “WARNING”
INDICATES A DEFINITE
RISK OF EQUIPMENT
DAMAGE OR DANGER TO
PERSONNEL. FAILURE TO
OBSERVE AND FOLLOW
PROPER PROCEDURES
COULD RESULT IN SERIOUS
OR FATAL INJURY TO
PERSONNEL, SIGNIFICANT
PROPERTY LOSS, OR
SIGNIFICANT EQUIPMENT
DAMAGE.
NOTE: A “ NOTE ” indicates
that additional information is
provided about the current
topics.
Intended use of this
manual
WARNING: THIS TECHNICAL
DOCUMENTATION CONTAINS
INSTRUCTIONS ON SAFETY,
INSTALLATION, OPERATION
AND MAINTENANCE. IT
MUST BE STUDIED BEFORE
WORKING WITH THE TOOL.
This manual is intended
for use by field service,
engineering, installation,
operation, and repair
Manufacturer & Agents World Wide
personnel. Every effort has
been made to ensure the
accuracy of the information
contained herein. Blohm
+ Voss Oil Tools, LLC, will
not be held liable for errors
in this material, or for
consequences arising from
misuse of this material.
Anyone using service
procedures or tools, whether
or not recommended by
Blohm + Voss Oil Tools,
LLC, must be satisfied that
neither personal safety nor
equipment safety will be
jeopardized.
Intellectual property
All rights retained. No part
of this document may be
reproduced in any form
(print, photocopy, microfilm
or any other procedure)
or be processed using an
electronic system without
written approval of Blohm +
Voss Oil Tools, LLC
All information contained
in this manual is based
upon the latest product
information available at the
time of printing.
Dependent on ongoing
technical improvements
(ISO 9001) “Blohm + Voss
Oil Tools, LLC” reserves the
right to change the design
and specifications without
announcement.
The values specified in
this manual represent the
nominal values of a unit
produced in series. Slight
deviations in the case of
the individual devices are
possible.
NOTE: In the event of
problems that cannot be
solved with the aid of this
manual, please contact
one of the addresses listed
below.
General remarks
As with all rig equipment, the
GrayChain 3570 Pneumatic
Drill Pipe Spinner must be
operated in accordance
with accepted rig safety
practices and procedures. All
operators should be familiar
with all safety precautions
Limited Warranty
The warranty provided will
be void if the GrayChain is
either:
1. Repaired or serviced by
a service facility which
was not authorized by
Blohm + Voss Oil Tools,
LLC.
2. Replacement parts not
manufactured by Blohm
+ Voss Oil Tools, LLC are
used.
3. Modifications were made
to the GrayChain which
were not approved by
Blohm + Voss Oil Tools,
LLC.
and recommended
installation and operating
procedures, including the
information provided in this
manual and any other safety
publications by Blohm +
Voss Oil Tools, LLC Listed
on the next page are safety
considerations and warnings
found throughout this
manual:
Premier Sea & Land Pte Ltd
54 Loyang Way
Singapore 508747
Phone: +65-6543-1433
Fax: +65-6543-1219
enquiries@mtqpremier.com.sg
HI-Energy Service
Hamriyah Free Zone
Sharjah, UAE
Phone: +971-55-2308-252
Fax: +971-4-2980-862
bdm@hi-energyservices.com
Blohm + Voss is a trademark of Blohm + Voss Shipyards GmbH®
Blohm + Voss Oil Tools GmbH
Hermann-Blohm-Straße 2
20457 Hamburg
Germany
Phone: +49-40-3119-1162
Fax: +49-40-3119-8196
oiltools@blohmvoss.com
www.blohmvoss-oiltools.com
Blohm + Voss Oil Tools, LLC
11355 FM 830
Willis, Texas 77318
United States of America
Phone: +1-936-856-4995
Fax: +1-936-856-7487
BVOT@blohmvoss.com
www.blohmvoss-oiltools.com