Introduction
3
Oven Components
Conveyor Belt
--- stainless steel chain link (con-
veyor) belt that carries product through the oven.
Conveyor Belt Master Links
--- allow easy remov-
al of the conveyor belt for maintenance and clean-
ing. Identified by locating double spaces between
regular links on belt.
Conveyor Belt Support Assembly (drive & idle
sides)
--- located on both ends of oven deck. Drive
side support drives conveyor belt.
Control Box
--- contains electrical wiring, cooling
fan, drive motor and drive chain.
Drive Motor
--- provides power to move the con-
veyor belt.
Drive Chain
--- connects the drive motor sprocket
to the drive side conveyor belt support sprocket.
Baking Chamber
--- products pass through the
baking chamber on the conveyor belt for cooking.
Nozzles
--- distribute heated air to the bottom of
the baking chamber. Located inside the oven, un-
der the conveyor belt.
Nozzle Hold-Down Bracket
--- holds the front end
of the nozzles in position. Located inside the oven.
Return Air Diverters (2, drive and idle sides)
---
diverts return air from the baking chamber back to
the combustion chamber. Ensures even baking
throughout oven. Located inside the oven, be-
neath the nozzles.
Upper End Plug
--- keeps heat in the baking
chamber. Located on each end above the convey-
or belt.
Lower End Plug
--- helps keep heat in the baking
chamber. Located at each end below the convey-
or belt.
Crumb Pan
--- catches crumbs from products on
the conveyor. Located under conveyor belt at both
ends of the baking chamber.
Pull Down Door
--- open for auxiliary product in-
sertion.
Air Flow Plates (2, drive and idle sides)
--- dis-
tribute heated air to top of baking chamber. Lo-
cated inside of oven at the top of baking chamber.
Conveyor Support
Assembly
Air Flow
Plate
Handle for
Pull Down Door
Crumb
Pan
Control
Box
Nozzles
Upper
End Plug
Lower
End Plug
Conveyor
Support
Assembly
Conveyor Belt
Return Air
Diverter
Figure 2
