Installation
6
Delivery and Location
DELIVERY AND LOCATION
The COSĆ5HA hatchable combination oven is
shipped fully assembled on a special vibration reĆ
sistant pallet. In addition, the oven is mounted on
two hardwood skids to facilitate removal from the
pallet. These skids were designed to match the
height of the separate installation base. This alĆ
lows the assembled oven to be slid directly onto
the base after the installation base is mounted in
position and hard plumbed with potable water and
electric power.
COSĆ5HA dimensions:
Height
62.25" with legs
68.25" with 6" legs
65" with base
Width
38.19"
Depth
44.13"
The following clearances are required for the
COSĆ5HA:
Sides
0"
Rear
6"
UNPACKING
1. Remove the protective cover around the oven.
Inspect the unit for visible damage.
2. Remove the bolts that lock the 2Ć1/2" x 4"
hardwood skids to the pallet base.
3. Use a forklift to raise the oven assembly off the
pallet. The skids can be left in position to assist
in moving an assembled oven onto the instalĆ
lation base or discarded after the oven assemĆ
bly is unbolted into separate components for
passage through hatches.
ASSISTANCE
Blodgett Combi also provides engineering assisĆ
tance when custom installation kits are required.
Our goal is to ensure that each oven installation
can be made in the most efficient and economical
manner.
For further information, please contact the BlodĆ
gett Combi Engineering Department:
D
Phone
1Ć800Ć331Ć5842
D
Fax
802Ć860Ć3702
