Blocks ONE MKII, User Manual

Page: 50 / 110

PRO S30 USER GUIDE MANUAL DE UTILIZAÇÃO 50
05.1 Removing objects and cleaning the build plate
not provide optimal adhesion. It is necessary to add a product to promote the adhesion of
the object to the plate in addition to ensuring that the plate is leveled and at an ideal dis-
tance from the nozzle. We recommend that you use a 3D printing lacquer. To remove the
printed objects you can use a spatula or x-acto attacking the contact zone between the
object and the plate after you have removed the glass plate from the machine. It is advisable
alcohol and can also resort to a spatula or x-acto if necessary.
05.2 Cleaning the nozzle
After several prints it is normal for the nozzle to show some dirt due to the accumulation of
-
ing this temperature, the operator can use a dry cloth or cleaning paper to remove the dirt.
Attention: At this temperature the hot end can cause burns, the user is advised to use
tweezers to handle the cleaning object to be used.
05.3 Firmware updates
Maintenance
05
1. Make sure you have Cura 15.02.1 installed.
In case you don’t, download and install Win/Mac.
2. Download the HEX file from our Github website.
3. Connect the 3D printer USB cable to your computer.
4. Open Cura and select menu “Machine” -> “Install custom firmware”.
5. Select the downloaded HEX file.
6. Wait for the uplod to finish and press “OK”.