20
21
Connections & Settings
1.
Adjustments
The turntable has already been adjusted at works. However if you need to adjust the rotation
speed, use these controls.
2.
Ground terminal
If you do not use the internal Pre Amp connect a groundwire between this terminal
and the Amplifire.
3.
Analog output
OUTPUT L and R are used for connecting the turntable to the RCA analog input on your ampli
fier. Cable compatible with these sockets are of the type RCA, they are traditionally
identified by a color code RED to the RIGHT channel and WHITE for the LEFT channel.
4.
Phono/Line
The turntable has a built-in PHONO preamplifier that is disengaged if you have an external
preamplifier. If you want to use the signals amplified by the internal amplifier of the turntable,
move the switch to Line. If you want to use an external PHONO preamplifier, move the switch to Phono.
5.
USB port
The sound of your vinyl record is converted to digital with a maximum resolution of
48KHz / 16bits. Use the USB cable that came with the device to connect the turntable to your
computer. A CD with Audacity recording software is also provided.
6.
DC IN
Plug the power adaptor here.
7.
Power ON/OFF
Use to turn the turntable on and off.
