18
19
Structure of the device
1.
Turntable platter
The platter is equipped with a slip mat. This makes it easier to manipulate the record for
scratch performance. Place vinyl records centered on the turntable platter.
2.
Counterweight
Adjustment creates the proper downward pressure of the stylus to the record. Attach now by
sliding the counterweight onto the rear of the tone arm.
3.
Stylus pressure adjustment scale
Adjust stylus cartridge’s pressure alignment.
4.
Antiskating knob
This applies inward force to the tone arm so it doesn’t skip outward across the record due to
the centrifugal force of the record spinning.
5.
Tonearm lift
Control the up and down action of the tonearm.
6.
Headshell
Install cartridge here. During installation, attach the stylus protector to guard the stylus tip
from damage.
Attach wires as follows:
White (L+) Left c
Blue (L-) Left channel –
Red (R+) Right c
Green (R-) Right channel –
7.
Tonearm
This is a fully manual tonearm, to start playback, gently place the stylus on the record using
head shell finger support or use the tonearm lifter.
8.
Play | Pause Button
Press this button to start playback or to resume playback after a pause.
9.
33/45 rotation speed setting button
Press these buttons to select the platter’s rotation according to your speed indicated on the
record for 33, 45 revolutions per minute.
