44
MANUAL WLAN installation
If any problem appears while setting up the setup-wizard, or you prefer to do a manual setup, please
proceed as follows:
▶
Press the „Menu“ button on the remote control. Using the arrow keys on the remote control, choose
first „System Settings“, then select „Internet Settings“, then „Manual Settings“, then „Wireless“.
▶
Select in the next step „DHCP active“. This is the default setting of all conventional Internet router and
it takes a lengthy network configuration * Confirm the setting.
▶
Now enter the name of your wireless network (SSID), pay attention to the correct spelling and use of
capital/small letters. Confirm with “OK”.
▶
Select the type of your password protection (usually WPA2 and AES). In case of doubt, consult the ma-
nual of your router.
▶
Enter the password of your WLAN network. Pay attention to the correct spelling and use of capital and
small letters. Confirm with “OK”.
▶
Now the router and your BB-200 should be connected and an internet connection should exist and
„Connected“ shall appear on the display.
Manual Cables Installation (Ethernet)
Should you do without a WLAN connection and connect the BB-200 to your router by cable (Ethernet),
please proceed as follows:
▶
Connect a free Lan jack to your router and to the Lan jack on the BB-200 using a Ethernet cable (RJ-45)
▶
Press the key „Menu“ on the device or on the remote control. Choose first „System Settings“, then
„Internet Settings“, then „Manual Settings „and then“ Cable „using the multi-function rotary knob.
▶
Next, select “DHCP „DHCP active“. This is the default setting of all conventional Internet router and it
takes a lengthy network configuration * Confirm the setting.
▶
Now the router and your BB-200 should be connected and an Internet connection should exist, „Con-
nected“ shall appear on the display.
* Should you have disconnected the DHPC function on you router, select please “DHPC inactive”. In this case, you must configure the Network, the rules
and specification should be known by now. For the configuration, you may need the MAC address of your Block device. You can find this under Menu/
System settings/Internet settings/Adjustment indicator/MAC address.
Summary of Contents for BB-200
Page 1: ...BB 200 Bedienungsanleitung Manual ...
Page 63: ...63 ...
