Block Optic CaraT Technical Manual Download Page 28 | Manualshive

Page: 28 / 34

Block Optic CaraT Technical Manual Download Page 28

Model „VarioCarat®“

Block Optic Design GmbH., Semerteichstr. 60, 44141 Dortmund, Tel.: +49 231 1087785-0, Fax: +49 231 1763065

24

Cleaning and care of the examintion unit

The antibacterial coated surfaces of the examination/ refraction unit VarioCarat® are wiped with a
clean, slightly damp cloth.

Do not use

abrasive or aggressive cleaning agents or disinfectants containing solvents.

Block Optic accepts no liability for damage caused by unsuitable cleaning agents.
Please also do not use solvents, chlorides, polishes, chemical cleaners or wax polishes. Please remove
ink stains immediately.
Do not use agents containing oil or grease.

IMPORTANT!

When cleaning the examination/ refraction unit with moistened cleaning cloths, no moisture

may penetrate the keyboard elements.
Set the toggle switch on the wall connection box to position 0 before starting cleaning!
Allow the VarioCarat® examination/refraction unit and the equipment to dry completely

before putting it back into operation!

Disinfection of the surfaces oft the examination/refraction unit.

All surfaces can be disinfected by the disinfectant Meliseptol® Foam Pure or Meliseptol® Rapid.

Wet all plastic and painted surfaces completely with Meliseptol® Foam Pure and rub with a clean

cloth. Do not rub the surfaces too dry.

IMPORTANT!

Make sure never to wet the keyboard and the connectors in the unit table directly. Please

use a clean cloth soaked in disinfectant and wipe afterwards.

Real wood veneer or surfaces with a tactile structure are not suitable for 100 % disinfection due to

their surface structure, as they are coated with an antibacterial clear varnish. A longer exposure time

with a surface wetting with e.g. Meliseptol® Foam Pure or Meliseptol® Rapid and a not complete

reabsorption of the residual disinfection liquid would lead to damage in the surface.

Before disinfecting, you should test the corresponding agent for compatibility on an inconspicuous

area. The appropriate exposure time must be observed.

You can find more information at

https://www.medipolis-intensivshop.de/

«
...
26
27
28
29
30
...
»

Summary of Contents for CaraT



































Reviews:

No comments